Network Devices
Art-Net / sACN Node Devices
ProPlex IQ Two 1616
- Manufacturer:
- Proplex
- Dimensions:
- W: 483 × D: 203 × H: 90mm (19" x 8" x 3.5")
- Weight:
- 3.8kg (8.4 lbs) Device only
- AC Power:
- 100-240V 50/60Hz
- Connectors:
- ・In/Output Power: Neutrik PowerCon NAC3MPA
・In/Output Data:
2x RJ45 Network ports: Network Port 1 supports PoE IN (802.3af)
16x DMX XLR5 female ports
- Protocols:
- Ethernet: Art-Net, sACN
DMX: DMX512
※ Currently, in March 2020, You cannot use RDM when using the sACN protocol because the sACN protocol (E1.31) doesn't officially support RDM.
- Features:
- ・1x LCD touchscreen
・Input or output on any connector
・RGBW activity LEDs at each output port
・Merge Art-Net or Streaming ACN from multiple sources
・Selectable one of four options for "DMX out refresh rate" (Adaptive, 20Hz, 30Hz, 40Hz)
- Notes:
- ・Large touchscreen for quick, easy setup and operation
・RDM Manager software available for system setup and feedback
- Accessory:
- Edison-PowerCON power cable
- Option:
- XLR 5pin male-male adapters for DMX inputs
dmXLAN nodeGBx 8
- Manufacturer:
- ELC
- Dimensions:
- W: 483 × D: 150 × H: 44mm Device only
- Weight:
- 3.5 kg Device only
- AC Power:
- 100-230V 50/60Hz
- Connectors:
- ・Input Power: Neutrik TRUE1
・In/Output Data:
2x 1Gbps Neutrik EtherCon
8x 5-pin XLR (female)
- Protocols:
- Ethernet: Art-Net, sACN(Net3), ShowNet
DMX: DMX512(1990), DMX512-A (RDM compliance)
- Features:
- ・DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full soft patch (channel by channel), programmable merging with DMX channel control.
・Fixed rate: use this setting if the sync mode doesn't work (40/33/25 fps)
・The Resend option can be used to send the merged signal onto the network again as a new universe.
・Support for WYSIWYG, ESP, Capture
- Signal Cable Type:
- UTP, STP, eCAT5 or later
- Accessory:
- Edison-TRUE1 power cable
- Options:
- ・CAT5, 6 Ethernet cables (Straight, Crossover)
・Ethernet Switches
・XLR 5pin male-male adapters for DMX inputs
- Notes:
- ・Available to assign DMX in/output, universes, protocols, rate and IP address via the device.
・Please install ELC’s freeware dmXLAN software for a more detailed setting, such as data splitting, merging, soft patching, and backup.
- Rack Case Dimensions:
- W: 540 × D: 310 × H: 75mm
dmXLAN nodeGBx 8
- Manufacturer:
- ELC
- Dimensions:
- W: 483 × D: 150 × H: 44mm: Device
W: 540 × D: 310 × H: 75mm: Rack case
- Weight:
- 3.5 kg
- AC Power:
- 100-240V 50/60Hz
- Consumption Power:
- Max. 10w
- Connectors:
- Input Power: Edison with Ground
In/Output Data: 2x 1Gbps Neutrik EtherCon,
8x 5-pin XLR (female)
- Protocols:
- Ethernet: Art-Net, sACN(Net3), ShowNet
DMX: DMX512(1990), DMX512-A (RDM compliance)
- Features:
- ・DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full soft patch (channel by channel), programmable merging with DMX channel control.
Fixed rate: use this setting if the sync mode doesn't work (40/33/25 fps)
・The Resend option can be used to send the merged signal onto the network again as a new universe.
- Option:
- 5-pin XLR male to male adapters
- Notes:
- ・Available to assign DMX in/output, universes, protocols and IP address via the device.
・Please install ELC’s freeware dmXLAN software for a more detailed setting, such as data splitting, merging, soft patching, and backup.
Net3 4-Port Gateway
- Manufacturer:
- ETC
- Dimensions:
- W: 216 × D: 208 × H: 44mm Device only
- Weight:
- 2.7 kg Device only
- AC Power:
- 8-28V (PoE compliance)
- Consumption Power:
- Max. 5w
- Control:
- ・USITT DMX512 4-port
・Up to 2,048 channels in the combination of data input or output
- Functions:
- The Four-Port Gateway uses bidirectional Ethernet communication with other network devices to send or receive DMX512 and Remote Device Management (RDM) signals, ETC Net3, ACN, and sACN.
- Notes:
- ・Please order Ethernet cable as necessary.
・Due to PoE compliance system, AC power cable is optional.
- Rack Case Dimensions:
- Flight Case:
W: 550 × D: 320 × H: 75mm (Dual Top)
Pathport OCTO
- Manufacturer:
- Pathway Connectivity
- Dimensions:
- W: 432 x D: 152 x H: 40mm
- Weight:
- 2.2 kg Device only
- In/Output Connectors:
- Power cable: Edison with Ground
Data:
1x 100Mbps Neutrik EtherCONx1
8x DMX 5-pin (female)
- AC Power:
- 85-240V 50/60Hz
- Protocols:
- Ethernet: ArtNet, sACN(Net3), Pathport, ShowNet
DMX: DMX-512A, DMX512(1990), RDM
- Functions:
- • Eight DMX512 ports, individually configurable.
• Map up to eight sources to each output channel, with merge and/or priority options user-set for each source.
- Rack Case Dimensions:
- Flight Case:
W: 535 x D: 325 x H: 73mm
- Notes:
- ・The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction, and protocol selection.
・Front panel UI supports the configuration of IP settings, port direction, basic patching, and more.
・Route DMX on either a universe or channel-by-channel basis.
・Please install the software Pathport Manager for a more detailed setting.
・Please order XLR 5-pin male-male adapters if necessary if the device is assigned 5-port input mode.
Pathport Quattro
- Manufacturer:
- Pathway Connectivity
- Dimensions:
- W: 217 x D: 178 x H: 44mm
- Weight:
- 1.0 kg Device only
- In/Output Connectors:
- Input Power: DC Jack with Edison AC adapter
Input Data:
1x 100Mbps Neutrik EtherCON
4x DMX 5-pin (female)
- DC Power:
- ・DC24V with AC 100V adapter
・Operates on PoE (Power-over-Ethernet)
- Protocols:
- Ethernet: ArtNet, sACN(Net3), Pathport, ShowNet
DMX: DMX-512A, DMX512(1990), RDM
- Functions:
- • Eight DMX512 ports, individually configurable.
• Map up to eight sources to each output channel, with merge and/or priority options user-set for each source.
- Load Case Dimensions:
- Plastic Cardboard Case:
W: 286 x D: 238 x H: 157mm
- Notes:
- ・The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction, and protocol selection.
・Front panel UI supports the configuration of IP settings, port direction, basic patching, and more.
・Route DMX on either a universe or channel-by-channel basis.
・Please install the software Pathport Manager for a more detailed setting.
・Please order XLR 5-pin male-male adapters if necessary if the device is assigned 5-port input mode.
Net Lynx IP/OP
- Manufacturer:
- Artistic Licence
- Dimensions:
- W: 195 × D: 55 × H: 115mm
W: 197 × D: 58 × H: 22mm with truss-mounted
- Weight:
- 0.7kg: Device only
1.2kg: with truss-mounted
- Connectors:
- XLR 5-pin
- DC Power:
- 9V DC-48V
- Consumption Power:
- 2w
- Functions:
- ・Ethercon XLR/RJ45 10BaseT ethernet port, compatible with Art-Net.
・2x DMX512 inputs, compatible with all variants of DMX, including DMX512-A.
・Support for RDM (Remote Device
Management) V1.0 (E1.20 - 2006 ESTA
Standard)
Data-Lynx O/P
- Manufacturer:
- Artistic Licence
- Dimensions:
- W: 440 x D: 220 x H: 45mm
- Weight:
- 2.4 kg Device only
- In/Output Connectors:
- Input Power: Edison with Ground
Input Data:
2x 100Mbps Neutrik EtherCon
12x XLR 5-pin (female)
- AC Power:
- 90-250V 50/60Hz
- Protocols:
- Ethernet: ArtNet
DMX: DMX512-A
- Features:
- The product accepts Art-Net (the public domain protocol invented by Artistic Licence) and sACN (the standard managed under ESTA/ PLASA E1.31).
- Rack Case Dimensions:
- Flight Case:
W: 535 x D: 360 x H: 73mm
- Notes:
- ・Please install DMX-Workshop™ for a more detailed setting, such as The ‘Configure Node’ option, ‘Copy to clipboard’, ‘Merge Controls’, ‘Indicators’,‘ RDM Devices’, and ‘Configure IP Address’.
・DMX-Workshop™ is a software application that runs on the Windows XP & Windows 7 platforms. It is free of charge and available via download from the Artistic Licence website.
・2x Ethernet (front/ rear) are isolated use.
