DMX Devices
DMX Devices etc.
DMX Mixer 4IN-1OUT / 2IN-1OUT
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 483 × D: 200 × H: 44m: Device only
W: 510 × D: 350 × H: 65mm: Rack case
- Weight:
- 5.8 kg: 4IN-1OUT
4.8 kg: 2IN-1OUT
- Type of Connector:
- Edison
- AC Power:
- 90-120V 50/60Hz
- Consumption Power:
- Max. 50w
- In/Output Data:
- ・Data: 5-pin Locking XLR
・Input: 2-Port DMX or Max. 4-port DMX
・Output:1 port DMX
- Features:
- ・Available to merge 2-port or 4-port of DMX data as output 1 DMX line data.
・Available to assign or modify DMX start address as desired via port B for 2in-1out, port B, C, D for 4in-1out.
Multi Vaccine
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 483 × D: 200 × H: 44mm: Device only
W:510 × D:350 × H:65mm: Rack case
- Weight:
- 5.8 kg
- Type of Connector:
- Edison
- AC Power:
- 100-110V 50/60Hz
- Consumption Power:
- Max. 50w
- In/Output Data:
- ・Data Type: DMX
・Data: 5-pin Locking XLR
- Setting:
- DMX data waveform matching device.
・Break: 100μ-340μsec.
・Mark After Break: 20μsec or 800μsec.
・Inter byte time: 0 sec. or 44μsec.
・Packet: 64ch-512ch
DMX-Wireless II
- Manufacturer:
- Matsumura electric mfg Co., Ltd.
- Dimensions:
- W: 175 × D: 282 × H: 95mm
Receiver and Transmitter
- Weight:
- 2.4 kg Receiver and Transmitter
- Type of Connector:
- Edison with ground
- AC Power:
- 100V 50/60Hz
Consumption Power: 10W
- In/Output Data:
- Data: 4-port
DMX: 5-pin Locking XLR
Transmitter Data Method: Spread spectrum (SS)
Transmitter Power Output: Less than 10mW/MHz
No license required
- Work Frequency Section:
- 2,412-2,484MHz
- Communication Distance:
- 50- over 100m
Note: You might be restricted to a shorter communication distance value in an indoor venue.
- Data Speed:
- ・Selectable from 1, 2, 5.5, 11Mbps
・Recommend 5.5Mbps use.
- Note:
- If you assigned faster than 5.5Mbps data speed, the environment of receiving data might be restricted.
DMX Digital Patching Systems
Patchan V
- Manufacturer:
- Tama Tech Lab.
- Load Case Dimensions:
- W: 535 × D: 558 × H: 175mm
- Weight:
- 16.4 kg
- Type of Connector:
- Edison
- AC Power:
- ・100-200V 50/60Hz: Patchan V
・100V 50/60Hz: Monitor screen
- Digital In/Output:
- DMX512: 5-pin Locking XLR
- Analog Input:
- 3 x 45ch multi snake (total:135ch)
- Internal Memory Devices:
- Silicon Disc
- External Memory Devices:
- 3.5” floppy disk(FDD)
- Functions:
- DMX Digital Patching Device
・Patching method: Available to patch from channel to dimmer number and vice versa (Max.512ch)
・Create files: 16
・Available to assign for each channel as below,
non-dimmer
dimmer curves (6 types)
・Other functions:
information retrieval
swap channels or dimmer numbers
dimmer (lamp) check
dimmer level
・Block (Group) patching: up to 12 dimmers per group
・Generate Magic Sheet
- Note:
- ・Attaches 8ch preset faders: available to record 8 scenes.
・Available to use a mouse when generating the magic sheet only.
- Accessories:
- ・TFT monitor screen
・Keyboard
・8ch preset faders
・Adapter cable for Patchan V to preset faders.
Patchan Light
- Manufacturer:
- Tama Tech Lab.
- Load Case Dimensions:
- W: 510 × D: 230 × H: 68mm
- Weight:
- 5.6 kg, including device and rack case
- Type of Connector:
- Edison
- AC Power:
- 100-200V 50/60Hz
- Digital In/Output:
- DMX512: 5-pin Locking XLR
1x Input, 2x Output
- Internal Memory Device:
- Internal compact flash card
- External Memory Devices:
- External device, such as a laptop computer etc.
- Functions:
- DMX Digital Patching Device
・Patch fixtures via Windows, (Max. 512ch)
・One dimmer channel can patch only one channel.
・Create files: 8
・Available to disconnect the laptop when the playback mode.
- Note:
- ※ Please confirm (click) “update/save” after editing data or before disconnecting the laptop.
- Accessories:
- ・The laptop with installed the software.
・Power cable
・RS232 adaptor cable.
Patchan PL02
- Manufacturer:
- Tama Tech Lab.
- Digital Input:
- DMX512: 2x 5-pin Locking XLR
- Digital Output:
- DMX512: 2x 5-pin Locking XLR
※ Use a data buffer (no isolation)
- Internal Memory Device:
- Compact flash card
- External Memory Devices:
- External device, such as a laptop computer etc.
- Functions:
- DMX Digital Patching Device
・Available to patch (in /output data) up to 1,024ch.
・One dimmer channel can patch some / different channels.
・Available to create the Multi patch (Max. 512ch).
・Create files: 8
・Assign dimmer curves (Normal on/off, User1-4) each channel.
・Available to edit dimmer curves via assigning values using a mouse.
・Available to disconnect the laptop when the playback mode.
- Notes:
- ※ Please confirm (click) “update/save” after editing data or before disconnecting the laptop.
- Accessories:
- ・The laptop with installed the software.
・Power cable
・USB cable
・Mouse
Patchan PS08M
- Manufacturer:
- Tama Tech Lab.
- Load Case Dimensions:
- W: 270 x D: 1 80 x H: 65mm: Device only
W: 455 × D: 245 × H: 360mm:
Laptop and device
- Weight:
- 1.4 kg Device only
- Type of Connector:
- Edison
- Digital Input:
- DMX512: 1x 5-pin Locking XLR
- Digital Output:
- DMX512: 1x 5-pin Locking XLR
- Internal Memory Devices:
- N/A
- External Memory Devices:
- External device, such as a laptop computer etc.
- Functions:
- ・Available to patch from dimmer channel to channel and vice versa.
・Save and backup data systems are in the software.
※ Required installing software on the windows computer.
- Functions of 8x preset faders:
- ・How to assign the preset faders:
1. Plug in the console to DMX input.
2. Create the scene.
3. Press “REC” and the flush button or input the table values.
・All data can edit and save on the computer.
- Accessories:
- ・The laptop with installed the software.
・Power cable
・USB cable
DMX Mergers
MATRIX Patch
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 482 x D: 230 x H: 90mm
- Weight:
- 0.8 kg
- Connector Type:
- Edison
- AC Power:
- 100-240V 50/60Hz
- Digital Intput:
- DMX512: 8-port 5-pin Locking XLR
- Digital Outtput:
- DMX512: 8-port 5-pin Locking XLR
- Functions:
- ・Available to patch into all universes via switches (EDIT, DOWN, UP, ENTER) on the device.
・The capacity of creating files: 8 (assign playback mode via switches 1-8 buttons on the device).
・Switch program mode and lock mode via a key.
※When patching, assign all 8 ports to record a pattern. Please ensure not to press the "EDIT" key while programming. The programming will be invalid.
- Load Case Dimensions:
- W: 530 × D: 370 × H: 120mm
MATRIX Patch Ⅱ 16*16
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 482 x D: 405 x H: 180mm
- Weight:
- 16 kg
- Connector Type:
- Edison
- AC Power:
- 100-240V 50/60Hz
- Digital Intput:
- DMX512: 16-port 5-pin Locking XLR
- Digital Outtput:
- DMX512: 16-port 5-pin Locking XLR
- Functions:
- ・Available to patch into all universes via switches (EDIT, DOWN, UP, ENTER)on the device.
・The capacity of creating files: 8 (assign playback mode via switches 1-8 buttons on the device).
・Switch program mode and lock mode via a key.
・Available to assign, edit, modify, and playback the patch files via Windows software.
※When patching, assign all 16 ports to record a pattern. Please ensure not to press the "EDIT" key while programming. The programming will be invalid.
- Note:
- The display of #10 or later: a(10), b(11) …g(16)
- Load Case Dimensions:
- W: 535 × D: 535 × H: 210mm
DMX/RDM Splitters
Lumi Split 2.10 (RDM)
- Manufacturer:
- Luminex
- Dimensions:
- W: 482 × D: 204 × H: 44mm: Device
W: 550 × D: 310 × H: 70mm: Load case
- Weight:
- 2.54 Kg
- AC Power:
- 100V-240V 50/60Hz
- Consumption Power:
- Max. 15w
- Connectors:
- ・In/Output Power: Neutrik PowerCON TRUE1
・Input Data:
2x gold plated Neutrik 5 pin XLR (male - front)
2x gold plated Neutrik 5 pin XLR (male - rear/thru)
・Output Data: 10x gold plated Neutrik 5 pin XLR (female)
- Protocols:
- DMX512 (1986 & 1990)
DMX512-A
RDM ANSI E1.20
- Features:
- ・The 10 port LumiSplit with A/B zone selection offers you the highest port flexibility at configuring multiple DMX lines.
・Manage and set-up all your lighting fixtures and LumiSplit devices through any RDM controller.
・DMX port isolation: Optical and galvanic isolation per port.
・In/Output status indication: 2&10x RGB LED and LumiNet Monitor, (Port A: blue, Port B: red, RDM-A: light blue, RDM-B: yellow).
- Accessory:
- Power cable: Edison with Ground-TRUE1
DMX512A-Hub2.10
- Manufacturer:
- Luminex
- Dimensions:
- W: 482 × D: 182 × H: 44mm: Device
W: 540 × D: 310 × H: 75mm: Load case
- Weight:
- 3.5 kg
- AC Power:
- 90-260V 50/60Hz
- Consumption Power:
- Max. 20w
- Connectors:
- ・Input Power: Edison with Ground
・Input Data:
2x gold plated Neutrik 5 pin XLR (male - front)
2x gold plated Neutrik 5 pin XLR (male - rear/thru)
・Output Data: 10x gold plated Neutrik 5 pin XLR (female)
- Protocols:
- DMX512 (1986 & 1990)
DMX512-A
RDM ANSI E1.20
- Features:
- ・The 10 port LumiSplit with A/B zone selection offers you the highest port flexibility at configuring multiple DMX lines.
・Manage and set-up all your lighting fixtures and LumiSplit devices through any RDM controller.
・DMX port isolation: Optical and galvanic isolation per port
・A built-in rechargeable backup battery
- Accessory:
- Power cable: Edison with Ground-TRUE1
◆ID-T8 Splitter
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 530 × D: 340 × H: 74mm
- Weight:
- 5.0 kg
- Connector Type:
- Edison
- AC Power:
- 100V 50/60Hz
※ When the 100/200V labels are on the device, 200V will be acceptable as well.
- Digital Intput:
- DMX512
- Digital Outtput:
- 8-port isolated (female), 1 port for thru
- DMX port termination / biasing:
- 1x END switch
◆ID-T8 II Splitter
- Manufacturer:
- Tama Tech Lab.
- Load Case Dimensions:
- W: 530 × D: 340 × H: 74mm
- Weight:
- 5.0 kg
- Connector Type:
- Edison
- AC Power:
- 100-200V 50/60Hz
- Digital Intput:
- DMX512
- Digital Outtput:
- ・2x 4-port isolated (female)
・Available to assign 8-port isolated mode.
・2-port for thru (when 8-port mode use, the thru-port is modified as 1port mode).
- DMX port termination / biasing:
- 2x END switch
